Jamb mounting hole processing unit: equipped with 6 sets of drilling and milling heads, which can process 6 mounting holes at one time or more than 6 mounting holes in two or more times Left profile end processing unit: process glue injection holes and screw holes on the left end of the profile Label printing and sticking unit: Print the profile information to self-adhesive label and automatically paste it on the upper surface of the profile
Machine Parameter
1. Power supply: 380V, 3Phase, 50Hz
2. Drilling/milling spindle rotating speed: 3000~9000rpm
3. Drilling/milling spindle power:3.0kW
4. Working air pressure:0.5~0.8MPa
5. Compressed air consumption: 240L/min
6. Total input power: 90kW
7. Total weight: 17tons
8. Overall size(L*W*H): 3010mm *3850mm *2100mm
9. Maximum section width of profile applied to: 100mm
10. Maximum section height of profile applied to: 145mm
11. Processing length range: 360~5300mm
12. Length processing accuracy: ±0.1mm/1000mm
13. Cutting angle accuracy: ±5'
14. Minimum pacing between center mullion screw connection holes or laser marking lines: 400mm
15. Jamb fixing hole spacing: minimum280mm
Main Configuration of Parts
1. Motion control system: Siemens (Servo, PLC, Industrial computer, I/O module)
2. Air circuit components: AirTAC
3. Milling and cutting spindle: Rundawords
4. Highly flexible wires and cables: Shanghai Echu
5. Low voltage electrical components: Schneider/Omron/ Honeywell
6. Frequency converter: Delta
7. Linear guide: HIWIN/AirTAC
8. Ball screw: TBI
9. Gears and racks: YYC
10. Lubrication system: BAOTN
11. Drag chain system: HUASITECH