LJZX4-6500 is mainly designed for cutting & milling thermal break window and door profiles and some industrial aluminum profiles. It can drill or mill holes and slots on the four surfaces of the profiles, then cut the profiles at any angle between ±45°. It can process the glue hole, pin hole, drain hole, sharp angle, handle hole and lock hole, etc. Only load the aluminum profile to machine once, all processes can be completed.
Products: CNC Aluminum Profile Machining Center
Description: CNC Machining Centers for Aluminum Profiles, Window Profile CNC Machining and Cutting Center
Machine parameters
- Power supply: three-phase four-wire 380V 50Hz
- Cutting spindle motor: 3.0kW, 2860r/min
- Milling spindle: 3kW 9000r/min
- Feeding speed: 0~70m/min
- Blade feeding speed: 0~10m/min
- Milling speed: 0~15m/min
- Cutting efficiency: average ≤13s/segment
- Blade specification: 500x4x3.6x30x120
- Working air pressure: 0.5MPa~0.8MPa
- Air consumption: 150L/min
- Tota- power: 33.3kW+3.7kW (Industria- dust collector)
- Overal- weight: 8.8 T
- Overal- size (LxWxH): 15.3mx2.0mx4.2m
Configuration
- Contro- system: SIEMENS(PLC & Servo)
- Monitor: DELL
- Linear guide rail: HIWIN
- Guide screw: TBI
- Gear & rack: YYC
- Pneumatic components: AirTAC
- Low-voltage electric components: Schneider/Honeywell/Omron
- Cables & wires: EChu
- Spindle motor: Rundawords
- Hollow turning platform: SEIKING